Send Inquiry

Request To Call Back

Nitomortar S

Name: Nitomortar S
Brand: SHRI SHYAM CHEMICALS INDIA
Price: 2850.0 INR
Availability: InStock

Price 2850.0 INR/ Kilograms

Get a Price/Quote

MOQ : 100 Kilograms

Nitomortar S Specification

Storage
Store in cool, dry conditions, away from direct sunlight and moisture.

Packaging Type
Pre-weighed composite packs

Shelf Life
12 months if unopened and stored properly

Solubility
Insoluble in water

CAS No
Not applicable (mixture)

Chemical Name
Epoxy resin based mortar

Physical Form
Solid (three part system: base, hardener, and aggregates)

Grade
Industrial Grade

Purity(%)
100%

Type
Epoxy mortar system

Application
Structural repair of concrete and masonry surfaces, patching for damaged concrete, and filling voids and cracks.

Bond Strength
Excellent adhesion to concrete and masonry substrates

Color
Grey

Toxicity
Non-toxic when cured, handle with care in uncured state

Pot Life
Approximately 45 minutes at 27C

Mix Ratio
Refer to supplied instructions (typically pre-packed for ease of use)

Application Thickness
10 mm to 50 mm in single application

Standards
Meets relevant international specification for structural repairs

Compressive Strength
Up to 70 MPa at 7 days (when fully cured)

Curing Time
Initial setting in 6-8 hours at 27C, full cure in 7 days

About Nitomortar S

Nitomortar S is a high-strength, three-component epoxy resin mortar produced by Fosroc. Designed for fast and permanent structural concrete repair, it combines solvent-free epoxy resin with special silica aggregates to deliver exceptional abrasion resistance, chemical resilience, and impermeability.

Versatile Repair Solution for Structural Concrete

Nitomortar S stands as a specialized epoxy resin mortar formulated for the structural repair of concrete and masonry. Whether you are patching damaged surfaces, filling deep cracks, or restoring key structural components, it delivers high-strength performance. Its industrial-grade purity and excellent bond strength ensure long-lasting durability, making it a preferred choice for both preventive and restorative maintenance in numerous construction and infrastructure environments.

Easy-to-Use Pre-Packed System

The system comes in pre-weighed composite packs, enabling hassle-free mixing and accurate ratio control. Simply follow the supplied instructions to combine the base, hardener, and aggregates at the job site. This reduces preparation time, mitigates the risk of error, and ensures a uniform mixture for optimal results. The product's pot life of approximately 45 minutes at 27C gives ample working time for application.

FAQ's of Nitomortar S:

Q: How do I apply Nitomortar S for best results?

A: Combine the pre-packed base, hardener, and aggregates following the supplied instructions. Mix until homogeneous, and apply in a single layer between 10 mm and 50 mm thickness using a trowel on clean, prepared surfaces. Cure at recommended temperatures for optimal strength.

Q: What surfaces or structures can Nitomortar S be used on?

A: Nitomortar S is designed for structural repair and patching on concrete and masonry substrates. It is ideal for damaged floors, beams, columns, and areas with cracks or voids in both new and existing structures.

Q: When can I expect Nitomortar S to fully cure and be ready for use?

A: At 27C, Nitomortar S attains its initial set within 6 to 8 hours and achieves full cure in 7 days, allowing it to reach its maximum compressive strength and performance characteristics.

Q: Where should Nitomortar S be stored before use?

A: Store Nitomortar S in its original, unopened packaging in a cool, dry location, away from direct sunlight and moisture to preserve its 12-month shelf life and maintain its quality.

Q: What are the primary benefits of using Nitomortar S for repairs?

A: Nitomortar S offers high compressive strength, excellent adhesion to concrete and masonry, non-toxicity when cured, and resistance to water, making it a reliable and safe choice for lasting structural repairs.

Q: What is the process for mixing Nitomortar S components?

A: Mix the base and hardener thoroughly, then gradually add the aggregates while stirring until a uniform grey mixture is achieved. Apply promptly, as the pot life is approximately 45 minutes at 27C.

Q: Is Nitomortar S safe to use in inhabited environments?

A: Yes, Nitomortar S is non-toxic once fully cured. However, during mixing and application in its uncured state, standard safety precautions, such as wearing gloves and proper ventilation, are recommended.

Tell us about your requirement

Price:

Quantity

Select Unit

50
100
200
250
500
1000+

Additional detail

Mobile number